![]() If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. If the Paper Output Tray is closed, open it. Turn on the printer, and the printer ready to useI hope this information helps. Turn off the printer by pressing the POWER button or unplug the power cable 16. Then click "EEPROM", and the printer will print the results MP258 Re-setter."TPAGE(TTL=00000 COPY=00000)" 15. ![]() Click the "MAIN", then the printer will proceed, then MP258 will print one page with the words "D = 000.0"13. Prepare 2 paper in the printer (this is to print at the time the reset process)11. ![]() ![]() This situation indicates the printer is on and ready to reset SERVICE MODE.8. The computer will detect NEW DEVICE, Ignore it. MP258 printer will process (rather long), then the LCD Panel will show the number zero (0)6. The power button is pressed, release the button STOP / RESET, then press the STOP / RESET two times, then release both buttons simultaneously.5. Press the STOP / RESET and hold, then press and hold the POWER button.4. MP258 printer is turned off and plugged the power cord.3. The printer must be in SERVICE MODE, the way2. Reset Canon MP258 error 5B00 or P07IndicationsWhen the printer is turned on will show an error MP258 P07 in LCD panels and monitor screen will pop up an error 5B00.Resetter Canon MP2581. The remaining ink level cannot be detected. The machine is out of paper or will not feed.Ĭartridge is not installed in the correct position. The led screen on the printer will flash a letter E and will then be followed by two numbers: If the printer displays an error message, the following information should help to diagnose the problem. If the alarm light is on (lightning bolt in a triangle) it should be accompanied by an error code. A B LED light denotes that the black ink cartridge is running low.Ī C LED light denotes that the colour ink cartridge is running low.
0 Comments
Leave a Reply. |